|
|
Tuson Towable Tire Pressure Monitoring SystemTPMS4W4V: Four (4) Wheels & 0.453" Valve Stem Size
TPMS4W6V: Four (4) Wheels & 0.625" Valve Stem Size TPMS6W4V: Six (6) Wheels & 0.453" Valve Stem Size TPMS6W6V: Six (6) Wheels & 0.625" Valve Stem Size Box Contents:
- One (1) Receiver / Display - Four (4) or Six (6) Internal Sensors - Four (4) or Six (6) 0.453" or 0.625" Dia. Metal Valve Stems - One (1) RF Repeater Why do you need a TPMS system for your trailer tires? Maintaining properly inflated tires has been proven to:
The Tuson Towable Tire Pressure Monitoring System (TPMS4W4V) instantly detects trailer tire pressure and temperature for up to four (4) tires. The wireless tire pressure and temperature sensors mount inside your trailer tires and transmit signals in RF mode to a monitoring module inside your tow vehicle that displays individual tire pressure and temperature. The Towable TPMS allows drivers to monitor the current status of all their trailer tires, increasing towing safety by allowing the driver to monitor all tires while towing. Internal Sensor The internal TPMS sensor monitors tire pressure and temperature consistently and wirelessly transmits real-time data to the receiver. The Sensor is securely mounted to the valve stem inside the tire to prevent damage and/or theft. Internal TPMS sensors provide more accurate pressure and temperature readings than external valve stem mounted sensors. RF Repeater The RF Repeater is designed for enhanced RF transmission range by increasing the signal strength between the sensor and Receiver (Display unit). It is a Plug and Play device and is easy to install. Receiver The Receiver (Display unit) includes:
Continuously Monitors Critical Tire Monitoring Parameters
Visual and Audible Alarms When the TPMS sensor detects any abnormalities, the sensor immediately transmits visual and audible alarm warnings to the receiver. Never miss a beep! Easy Installation & Pairing Each Tuson Towable TPMS kit comes with designated wheel orientation marks on the surface of each sensor. When each sensor is installed according to the corresponding wheels, no initial pairing is required. Our design makes installation and pairing easy. Long-term Cost Savings Using the Tuson Towable TPMS not only saves you money through increased fuel economy, extended tire life, but the internal sensors have up to 5x the life expectancy of an external cap sensors. Tuson's internal sensors use the same integrated sensor design used in the OEM automotive industry and can last up to 10 years, depending on the use frequency. Adjustable & Customizable Settings Customize your trailer tire monitoring settings just the way you like it right at your fingertips. The Tuson Towable TPMS receiver allows you to select the pressure (kPa, psi, Bar) and temperature (°C, °F) units and set your desired temperature and pressure value to suit your needs. Interchangeable Wheel Order No need to remove the TPMS sensor from each tire during a tire rotation. The TPMS receiver allows you to easily change the sensors locations according to tire rotation arrangement. Receiver Specification
* Note: For kPa as pressure unit, the receiver will show “HI” on the display screen if pressure value is over 999 kPa. Otherwise, receiver shows the value normally in psi, Bar unit.
Repeater Specification
|
RELATED PRODUCTS
ActuLink Actuator
|
DirecLink Proportional Brake Controller
|
Tuson Sway Control
|